Home BGP Configurations Cisco 4-3-2. Cisco dual BGP with AS prepend (Load-balancing)

Cisco dual BGP with AS prepend (Load-balancing)

   
  • ISPs : 2
  • WAN links : 2
  • CPE : 1
  • PE : 2
  • Device : Cisco router with LAN/WAN ports.
  • WAN1 / Serial IP : 10.20.1.0/30 (mask 255.255.255.252)
  • WAN2 / Serial IP : 10.30.1.0/30 (mask 255.255.255.252)
  • LAN / Ethernet IP : 100.100.100.0/24 and 200.200.200.0/24
  • Receiving Route : No BGP route table from ISP
  • Memory : Full route(recommend 512M), partial route
    (recommend 128-256M), default route only in this sample.
  • LAN : ISP_A (AS20), ISP_B(AS30), Customer (AS10) and other ISP (AS50)

 

BGP sample configuration 3-1-1

 [Traffic flow]

Outbound traffic on CPE

In this sample, we are not receiving any BGP route table from ISP. We configured static routes are pointing to both serial links. Of cause it wouldn't be 50/50, due to packets will be routed by destination based.

Inbound traffic  on CPE

All traffic associated with 100.100.100.0/24 will be routed thru ISP_"A" and 200.200.200.0/24 will be routed thru ISP_"B". This configuration will cover failover situation as well. One of line failed, other link will take both traffic. See below example and testing output.

topology_BGP4-2-1.png

 
ciscopic.png

[CPE/Customer Cisco Router]
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname CPE
!
boot-start-marker
boot-end-marker
!
ip cef
no ip domain lookup
!
interface FastEthernet0/0
 no ip address
 duplex auto
 speed auto
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial1/0
 no ip address
 shutdown
 serial restart-delay 0
!
interface Serial1/1
 ip address 10.20.1.1 255.255.255.252
 serial restart-delay 0
!
interface Serial1/2
 ip address 10.30.1.1 255.255.255.252
 serial restart-delay 0
!
interface Serial1/3
 no ip address
 shutdown
 serial restart-delay 0
!
interface FastEthernet2/0
 ip address 200.200.200.1 255.255.255.0 secondary
 ip address 100.100.100.1 255.255.255.0
 duplex auto
 speed auto
!
router bgp 10
 no synchronization
 bgp log-neighbor-changes
 network 100.100.100.0 mask 255.255.255.0
 network 200.200.200.0
 redistribute connected
 neighbor 10.20.1.2 remote-as 20 <------------------ BGP neighbor to ISP_"A"
 neighbor 10.20.1.2 prefix-list to-ISP out <--------- Allow only IP block need to be advertised to ISP
 neighbor 10.20.1.2 route-map traffic-1 out <----- Applied route-map on BGP session with ISP_"A"
 neighbor 10.30.1.2 remote-as 30 <------------------ BGP neighbor to ISP_"B"
 neighbor 10.30.1.2 prefix-list to-ISP out <--------- Allow only IP block need to be advertised to ISP
 neighbor 10.30.1.2 route-map traffic-2 out <----- Applied route-map on BGP session with ISP_"B"
 no auto-summary
!
ip http server
no ip http secure-server
ip forward-protocol nd
!
ip route 0.0.0.0 0.0.0.0 Serial1/1 <------------- Load-sharing outbound traffic by destination
ip route 0.0.0.0 0.0.0.0 Serial1/2 <------------- Load-sharing outbound traffic by destination
!
ip prefix-list prefix-1 seq 5 permit 100.100.100.0/24
!
ip prefix-list prefix-2 seq 5 permit 200.200.200.0/24
!
ip prefix-list to-ISP seq 5 permit 100.100.100.0/24
ip prefix-list to-ISP seq 10 permit 200.200.200.0/24

!
route-map traffic-1 permit 10
 match ip address prefix-list prefix-2
 set as-path prepend 10 10 <-------- Prepending ASN 10 two times to announcement(200.200.200.0/24)

!
route-map traffic-1 permit 20 <------ Necessary this statement in order to pass thru route(100.100.100.0/24)
!
route-map traffic-2 permit 10
 match ip address prefix-list prefix-1
 set as-path prepend 10 10 <-------- Prepending ASN 10 two times to announcement(100.100.100.0/24)

!
route-map traffic-2 permit 20 <------ Necessary this statement in order to pass thru route(200.200.200.0/24)
!
line con 0
 exec-timeout 0 0
 logging synchronous
line aux 0
line vty 0 4
 login
!
end

 

[ISP_A PE/ISP Cisco Router]
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname ISP_A
!
boot-start-marker
boot-end-marker
!
ip cef
no ip domain lookup
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial1/0
 ip address 10.20.1.2 255.255.255.252
 serial restart-delay 0
!
interface Serial1/1
 ip address 20.20.1.1 255.255.255.252
 serial restart-delay 0
!
interface Serial1/2
 no ip address
 shutdown
 serial restart-delay 0
!
interface Serial1/3
 no ip address
 shutdown
 serial restart-delay 0
!
router bgp 20
 no synchronization
 bgp log-neighbor-changes
 redistribute connected
 neighbor 10.20.1.1 remote-as 10 <------------------ BGP neighbor to Customer
 neighbor 10.20.1.1 route-map no-routes out <------- No BGP routes will be sent to Customer
 neighbor 20.20.1.2 remote-as 20
 no auto-summary
!
ip http server
no ip http secure-server
ip forward-protocol nd
!
route-map no-routes deny 10 <------- No BGP routes will be sent to Customer
!
line con 0
 exec-timeout 0 0
 logging synchronous
line aux 0
line vty 0 4
 login
!
end


[ISP_B PE / ISP Cisco Router]

version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname ISP_B
!
boot-start-marker
boot-end-marker
!
ip cef
no ip domain lookup
!
interface FastEthernet0/0
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial1/0


 ip address 10.30.1.2 255.255.255.252
 serial restart-delay 0
!
interface Serial1/1
 ip address 30.30.1.1 255.255.255.252
 serial restart-delay 0
!
interface Serial1/2
 no ip address
 shutdown
 serial restart-delay 0
!
interface Serial1/3
 no ip address
 shutdown
 serial restart-delay 0
!
router bgp 30
 no synchronization
 bgp log-neighbor-changes
 redistribute connected
 neighbor 10.30.1.1 remote-as 10 <------------------ BGP neighbor to Customer
 neighbor 10.30.1.1 route-map no-routes out <------- No BGP routes will be sent to Customer
 neighbor 30.30.1.2 remote-as 30
 no auto-summary
!
ip http server
no ip http secure-server
ip forward-protocol nd
!
route-map no-routes deny 10 <------- No BGP routes will be sent to Customer
!
line con 0
 exec-timeout 0 0
 logging synchronous
line aux 0
line vty 0 4
 login
!
end

[Verifing output]

CPE#sh ip bgp nei 10.30.1.2 ro
BGP table version is 6, local router ID is 100.100.100.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete

   Network          Next Hop            Metric LocPrf Weight Path
*  0.0.0.0          10.30.1.2                0             0 30 i

Total number of prefixes 1


CPE#sh ip bgp nei 10.20.1.2 ro

BGP table version is 6, local router ID is 100.100.100.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete

   Network          Next Hop            Metric LocPrf Weight Path
*> 0.0.0.0          10.20.1.2                0             0 20 i

Total number of prefixes 1



CPE#sh ip bgp 200.200.200.0

BGP routing table entry for 200.200.200.0/24, version 6
Paths: (1 available, best #1, table Default-IP-Routing-Table)
  Advertised to update-groups:
     1          2
  Local
    0.0.0.0 from 0.0.0.0 (100.100.100.1)
      Origin IGP, metric 0, localpref 100, weight 32768, valid, sourced, local, best


CPE#sh ip bgp 100.100.100.0
BGP routing table entry for 100.100.100.0/24, version 5
Paths: (1 available, best #1, table Default-IP-Routing-Table)
  Advertised to update-groups:
     1          2
  Local
    0.0.0.0 from 0.0.0.0 (100.100.100.1)
      Origin IGP, metric 0, localpref 100, weight 32768, valid, sourced, local, best
CPE#


ISP_A#sh ip bgp neighbors 10.20.1.1 ro

BGP table version is 28, local router ID is 20.20.1.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete

   Network          Next Hop            Metric LocPrf Weight Path
*> 100.100.100.0/24 10.20.1.1                0             0 10 i
*  200.200.200.0    10.20.1.1                0             0 10 10 10 i

Total number of prefixes 2


 
ISP_B#sh ip bgp neighbors 10.30.1.1 ro
BGP table version is 32, local router ID is 30.30.1.1
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal,
              r RIB-failure, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete

   Network          Next Hop            Metric LocPrf Weight Path
*  100.100.100.0/24 10.30.1.1                0             0 10 10 10 i
*> 200.200.200.0    10.30.1.1                0             0 10 i

Total number of prefixes 2


 
TR_A#sh ip bgp 100.100.100.0
BGP routing table entry for 100.100.100.0/24, version 22
Paths: (1 available, best #1, table Default-IP-Routing-Table)
  Advertised to update-groups:
     1
  10
    10.20.1.1 from 20.20.1.1 (20.20.1.1)
      Origin IGP, metric 0, localpref 100, valid, internal, best



TR_A#sh ip bgp 200.200.200.0

BGP routing table entry for 200.200.200.0/24, version 23
Paths: (2 available, best #2, table Default-IP-Routing-Table)
  Advertised to update-groups:
     1          2
  50 30 10
    20.50.1.2 from 20.50.1.2 (30.50.1.2)
      Origin IGP, localpref 100, valid, external
  30 10
    20.30.1.2 from 20.30.1.2 (30.50.1.1)
      Origin IGP, localpref 100, valid, external, best


 
TR_B#sh ip bgp 100.100.100.0
BGP routing table entry for 100.100.100.0/24, version 26
Paths: (2 available, best #2, table Default-IP-Routing-Table)
  Advertised to update-groups:
     1          2
  50 20 10
    30.50.1.2 from 30.50.1.2 (30.50.1.2)
      Origin IGP, localpref 100, valid, external
  20 10
    20.30.1.1 from 20.30.1.1 (20.50.1.1)
      Origin IGP, localpref 100, valid, external, best



TR_B#sh ip bgp 200.200.200.0
BGP routing table entry for 200.200.200.0/24, version 24
Paths: (1 available, best #1, table Default-IP-Routing-Table)
  Advertised to update-groups:
     2
  10
    10.30.1.1 from 30.30.1.1 (30.30.1.1)
      Origin IGP, metric 0, localpref 100, valid, internal, best
TR_B#


Internet#tr 100.100.100.2
Type escape sequence to abort.
Tracing the route to 100.100.100.2

  1 20.50.1.1 68 msec 48 msec 32 msec
  2 20.20.1.1 [AS 20] 20 msec 60 msec 32 msec
  3 10.20.1.1 [AS 20] 16 msec 64 msec 72 msec
  4  *
    100.100.100.2 [AS 10] 60 msec 72 msec

 
Internet#tr 200.200.200.2
Type escape sequence to abort.
Tracing the route to 200.200.200.2

  1 30.50.1.1 52 msec 36 msec 28 msec
  2 30.30.1.1 [AS 30] 20 msec 64 msec 32 msec
  3 10.30.1.1 [AS 30] 36 msec 40 msec 56 msec
  4  *
    200.200.200.2 [AS 10] 92 msec 100 msec
Internet#

 

 [Dynamips testing]

Download and test it yourself with below Dynamips configuration files.
  Dynamips NET file
  Router configuration files

If you have any questions, feel free to send email us at contactus@showipbgp.com. If you are looking for professional grade service, you might want to try our "BGP experts service". What is "BGP Experts service"? Click "BGP Experts" from the top menu option. You will find out what the "BGP Experts" and what we are doing here for.


 
Google Translation
English Arabic Chinese (Simplified) Czech Dutch French German Italian Korean Portuguese Russian Spanish Filipino Vietnamese Thai Turkish
Statistics
Content View Hits : 548812
Polls
Who is the best ISP?
 
Global Route Table
Banner
Who's Online
We have 92 guests online
Related Items